Using an impact wrench, I was able to drive the bushing into the.
Oct 11, How to remove a leaf spring bushing without using an sort of press. This is the easiest way possible that i've learned works the best and the fastest for re. Aug 31, Like on Facebook bushfalling.bar on Twitter bushfalling.bar Oct 15, Keep the jack under the rear end. Do one end of a single spring at a time, removing the bolt securing the spring into the front pocket and/or the leaf spring and frame bolts on the rear shackle as required.
This keeps the rear end properly located.
I ended up having to take off the shock and remove the u-bolts to be able to put the front shackle on and then put it all back together.
3. Oct 20, In one end bushing is a steel encased rubber bushing. There is a steel inner sleeve, then rubber, then a steel outer shell. This outer shell is only about 1/16″ thick. The best way to remove these bushings is to use a torch and set the rubber on bushfalling.barted Reading Time: 1 min.
Mar 25, bushing removal spring tips R. RajahSC Well-known member. Posts 47 Thanks 0 Vehicle(s) CJ-7 3 spd., CJ-7 4 spd. Mar 12, #1 Hey guys, be gone awhile (my job) but now I'm back with a little time to put in on the cj My current project is replacing the leaf spring and shackle bushings and shock bushings (missing!) all the.
The OTC A Truck Front Leaf Spring, Pin and Bushing Service Set delivers 10 tons of hydraulic force to remove and install truck front spring eye bushing assemblies quickly and easily. Services bushings with diameters from /4 inch through /8 inch and /5(21). Product description OTC's Truck Front Leaf Spring, Pin, and Bushing Service Set delivers 10 tons of hydraulic force to remove and install truck front spring eye bushing assemblies quickly and easily. Services bushings with diameters from /4 inches through /8 inches and pin diameters from 7/8 inch through /8 inches/5(3).